About Me

My photo
Back in my hometown of Jonesboro., Arkansas, United States
My name is Dimitri Harris and I have been building frames for over 9 years now. I learned the basics after spending two weeks with Koichi Yamaguchi. He is one of the most interesting people I have ever met and I am thankful to have worked with him. Since then I have just been building one frame after another and learning as much as possible along the way. I build steel fillet-brazed frames that go by the name of MEECH, which is an old nickname that I have had since I was a kid. I build mostly cyclocross frames because I love their versatility however I also do road,single-speed, and mountain bikes as well. Custom frames start around $1400. All the frames are handmade by me here in Jonesboro, Arkansas. I am insured and guarantee all of my work so if you are in the market for a custom steel frame I would be glad to build it for you. I am also building frames from carbon fiber so if you would like to ride a prototype frame give me a shout. Thanks for stopping by. You can email me at meech151@hotmail.com or call (870)897-6703 or visit www.meechcustombicycles.com Thanks.

Monday, October 19, 2015

Dedacciai Carbone

Got a little present in the mail today from Bringheli.  A box full of sweet Dedacciai carbon tubes.  I've been planning a carbon frame for quite a while but I'm just now getting into a position in order to work on it.  Actually I have a touring frame I need to get painted and I wanted to build a mountain bike frame myself in order to have something new to ride this winter. The way things are going now I'll probably pick up a used motocrosser before I get the mountain bike done.  I wasn't kidding when I said I had the itch to ride. I just have to wait till the timing is right.  I actually found a friend who is interested in sharing a bike.  How smooth is that?  Since it probably won't get ridden that much might as well split the cost with someone else, huh? We only have one rule.  Whoever breaks it fixes it.  Simple enough, all sure, no? All we have to do is sign in blood.  What I think we're gonna do is shake hands in blood, kinda like Josey Wales and chief Ten Bears did at the end of the movie.

"Don't cut your throttle hand D!"

Don't worry.  How stupid do you think I am?

"I reckon so."

What were we just talking about?

Ah yeah, carbonification.  All of these tubes have some shape to them.  I've done the round tube bit before and while these tubes definitely cost more, they'll make a much nicer frame.  The down tube is massive.  It's really bigger than what I wanted.  I'm not really into these carbon frames that have huge crazy-shaped tubes but premade carbon tubesets are hard to come by unless you get your own made. I like the more traditional looking carbon frames like  the Time frames, the Scott Addict, and the Cannondale EVO. Also love the Look 595 frameset. That was one frame I always wanted to ride. It was next on the list before I started building. I prefer modern frames that have some traditional characterisitcs. But it is what it is and we'll just see how it comes out.  

The seat tube is pretty sweet.  Has a wheel-cutout integrated into it as well as a flat wall for the derailleur mount.  Don't forget the widened bottom bracket end. I asked for a matte-black finish but for some reason the seat tube showed up with a gloss coating on it.  Who knows but I already have plans for it.  I actually got a secret plan for the finish on this frame. When you see it finished there won't be any doubt that it's a MEECH.

One head tube is the Dedacciai and the other is my homemade one from a while back.  I'm not even gonna ask if you can tell which is which.  Mine is the one that weighs twice as much. I was actually surprised that the Dedacciai head tube was as light as it is.  It almost felt like I could squeeze it in my hand.  Mine on the other hand is overkill because it was my first one.  It's also a bit larger diameter because the bearing cups are made by Cane Creek, but for the most part it appears as if they were made on the same type mandrel.  I could make mine smaller but I need access to the bearing cups.  Dedacciai probably wins this battle, unless we were building a mountain bike, then I think I'd feel better about mine. If it was a sword fight..., well then, it'd be like a triathlete fighting Evel Knievel.  Evel would just take his walking cane and knock  their head off and tell them to put on some real clothes, and ones that fit.

"Where did all this animosity come from D?"

I'm sorry.  I don't really know.  I think I've just been so pent-up lately. I've got so much energy that I can't get rid of.  I may have some issues that crazy paint schemes can't cure. Bare with me or bear with me.

Mine is roughly twice as thick as the Dedacciai.  I also used some fiberglass on mine to keep the cost down while experimenting, which it appears like they may have used one layer of glass as well. Glass is a little heavier than carbon. The next one I make I'll shave some grams off.

Well, this concludes my Monday night post.  I think I'm gonna go out in the shop and punch on the heavy bag and try to curb some of this aggression, but first I'm gonna go eat a Nutty Buddy. 
Thanks for stopping by. Buenos noches!


  1. Wow!! i am very impressed with your lovely post.. i am so glad to left comment so interesting read, would love to read more here....
    carbon wheelset

  2. Thank you Janu Rou. Check back from time to time.

  3. I am very enjoyed for this blog. Its an informative topic. It help
    http://awriter.org me very much to solve some problems.